QL Light Co.,Ltd is one of the leading China super bright led strips manufacturers and suppliers with professional factory. Welcome to wholesale products from us.
CRI≥90 Version: very suitable for the application that require high color rendering. It will give you a true color.
Features of QL Constant Current Strips:
1. Constant current version: with stable current, suitable for high quality requirements project.
2. DC12V/DC24V input: Can work with any DC12V/DC24V PWM control system.
3. can work with unstable power supply and without damage.
4. with temperature Sensor: Can lower the current to protect itself when the temperature is too high.
5. Brightness uniform: With same brightness from the first end to the last end for around 10m.
◆ LED Type: CRI≥90 SMD5630
◆ Input Voltage: DC12V/DC24V
◆ Color: 2500-7000K
◆ LED Qty: 60LED/m, 70LED/m, 126LED/m
◆ Beam Angle: 120 degree
◆ IP Ratio: IP20, IP67 Version
◆ IP20: Non-waterproof Version
◆ IP67: With Silicone Tube
Color Rendering Testing Report:
Different IP version:
1. Decorative lighting for festivals, events, shows, exhibitions
2. Architectural lighting for canopy, corridor, window, archway,
3. Backlight or edge light for signage
4. Path or contour marking
5. Channel letter lighting
Different IP version:
Copied from LED NEWS.ORG (www.lednews.org)
LED lamp high temperature, pressure and impact testing
POSTED ON JULY 9, 2013 BY ADMIN IN LED KNOWLEDGE, LED LIGHTING WITH 2 COMMENTS
Test objects: LED lamps (lamps with LED Driver, finished products).
1) Put 5pcs LED lamps in a oven with temperature of 60℃;
2) Transfer input voltage to 1.1 times of LED light rated voltage by transformer.
3) Power on for 24 hours, and observe whether there is damage to the lamp, thermal deformation of materials and other anomalies;
4) After the light on testing let’s go to the impact test, through the relay controller to control the LED lamp in this environment, the steps is: light on 20 seconds, light off 20 seconds, 100 times cycles.
A: After high temperature and pressure testing, LED lighting surface can not be stripping, discoloration, cracking, deformation and other anomalies;
B: After impact test, LED lamps can not leakage, power off and other electrical anomalies.